3.8 Maintenance
This section provides detailed descriptions about all the settings classified under the [Maintenance] tab.
3.8.1 Firmware Maintenance
This screen allows you to perform firmware updates automatically or manually.
3.8.1.1 Firmware Maintenance
Enable Firmware Update
Description Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
• Changing this setting may require restarting the unit.
• Local firmware updates from the Web user interface (® see
3.8.2 Local Firmware Update) can be performed regardless
of this setting.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference FIRM_UPGRADE_ENABLE (Page 143)
Update Type
Description Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
• Changing this setting may require restarting the unit.
Document Version 2010-08 Administrator Guide 121
3.8.1 Firmware Maintenance
To Next Page
Loading...
