Panasonic KX-TGP500B04 - Firstdigit_Tim; Intdigit_Tim; Vm_Subscribe_Enable; Tone Settings

FIRSTDIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, within which the first digits of
a dial number must be dialed. When this timer expires, the unit will play
a busy tone.
Value Range 10–600
Default Value 30
INTDIGIT_TIM
Value Format Integer
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 3–10
Default Value 5
Web User Interface Reference Inter-digit Timeout (Page 105)
VM_SUBSCRIBE_ENABLE
Value Format Boolean
Description Specifies whether to send the SUBSCRIBE request to a voice mail
server.
Note
• Your phone system must support voice mail.
Value Range
• Y (Send the SUBSCRIBE request)
• N (Do not send the SUBSCRIBE request)
Default Value
N
Web User Interface Reference Send SUBSCRIBE to Voice Mail Server (Page 105)
4.5.2 Tone Settings
DIAL_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
164 Administrator Guide Document Version 2010-08
4.5.2 Tone Settings