Panasonic KX-TGP500B04 - Min_Delay_[1-8]; Nom_Delay_[1-8]

Value Format Integer
Description Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than "NOM_DELAY"
– This value must be greater than "MIN_DELAY"
– "NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
Default Value 20
Web User Interface Reference Maximum Delay (Page 96)
MIN_DELAY_[1–8]
Parameter Name Example MIN_DELAY_1, MIN_DELAY_2, …, MIN_DELAY_8
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to "NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Default Value 2
Web User Interface Reference Minimum Delay (Page 97)
NOM_DELAY_[1–8]
Parameter Name Example NOM_DELAY_1, NOM_DELAY_2, …, NOM_DELAY_8
Value Format Integer
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than or equal to "MIN_DELAY"
– This value must be less than "MAX_DELAY"
Default Value 2
Web User Interface Reference Initial Delay (Page 97)
174 Administrator Guide Document Version 2010-08
4.6.2 RTP Settings