Panasonic KX-TGP500B04 - Sip_Detect_Ssaf_[1-8]; Sip_Rcv_Det_Header_[1-8]

Value Range
• Y (Use "anonymous.invalid" for host name)
• N (Use normal host name)
Default Value
N
SIP_DETECT_SSAF_[1–8]
Parameter Name Example SIP_DETECT_SSAF_1, SIP_DETECT_SSAF_2, …,
SIP_DETECT_SSAF_8
Value Format Boolean
Description Specifies whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).
Value Range
• Y (Enable SSAF)
• N (Disable SSAF)
Note
• If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_[1–8]" in
4.7.2 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
Default Value
N
Web User Interface Reference Enable SSAF (SIP Source Address Filter) (Page 93)
SIP_RCV_DET_HEADER_[1–8]
Parameter Name Example SIP_RCV_DET_HEADER_1, SIP_RCV_DET_HEADER_2, …,
SIP_RCV_DET_HEADER_8
Value Format Boolean
Description Specifies whether to check the username part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
Value Range
• Y (Enable username check)
• N (Disable username check)
Note
• If set to "Y", the unit will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
• If set to "N", the unit will not check the username part of the SIP
URI in the "To" header.
Default Value
N
Document Version 2010-08 Administrator Guide 197
4.7.2 SIP Settings