Panasonic KX-TGP500B04 - Firmware File URL; Local Firmware Update; Encryption

Value Range
• Automatic
• Manual
Default Value Automatic
Configuration File Reference FIRM_UPGRADE_AUTO (Page 144)
Firmware File URL
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
• Changing this setting may require restarting the unit.
Value Range Max. 255 characters
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH (Page 145)
3.8.2 Local Firmware Update
This screen allows you to manually update the unit’s firmware from a PC by clicking [Update Firmware].
Note
• After the firmware has been successfully updated, the base unit will restart automatically.
3.8.2.1 Local Firmware Update
Encryption
Description Selects whether the firmware files are encrypted or not.
Value Range
• Yes
• No
Default Value Yes
122 Administrator Guide Document Version 2010-08
3.8.2 Local Firmware Update