Panasonic KX-TGP500B04 - Codec_G711_Req; Codec_G729_Param

Description Specifies the payload type number with "SDP_PTYPEx_y" for the
corresponding encoding name specified by "SDP_CODECx_y" (x:
priority, y: line number).
Value Range 0–127, 255
Note
• If an empty string is set for "SDP_CODECx_y", "255" must be
set as the value for the corresponding "SDP_PTYPEx_y".
Default Value 9 (for SDP_PTYPE0_1 to SDP_PTYPE0_8)
8 (for SDP_PTYPE1_1 to SDP_PTYPE1_8)
2 (for SDP_PTYPE2_1 to SDP_PTYPE2_8)
18 (for SDP_PTYPE3_1 to SDP_PTYPE3_8)
0 (for SDP_PTYPE4_1 to SDP_PTYPE4_8)
CODEC_G711_REQ
Value Format Integer
Description Specifies whether to set "PCMU" as a codec selection automatically
when "SDP_CODECx_y" (x: priority, y: line number) is set to any codec
selection other than "PCMU".
Note
• Changing this setting may require restarting the unit.
Value Range
• 0 (Do not set "PCMU")
• 1 (Set "PCMU")
Default Value 1
CODEC_G729_PARAM
Value Format Integer
Description Specifies whether to add an attribute line, "a=fmtp:18 annexb=no", to
SDP when "SDP_CODECx_y" (x: priority, y: line number) is set to
"G729A".
Note
• Changing this setting may require restarting the unit.
Value Range
• 0 (Do not add "a=fmtp:18 annexb=no")
• 1 (Add "a=fmtp:18 annexb=no")
Default Value 0
Document Version 2010-08 Administrator Guide 171
4.6.1 Codec Settings