Default Value 10
Web User Interface Reference Non-INVITE Retry Count (Page 91)
SIP_FOVR_NORSP_[1–8]
Parameter Name Example SIP_FOVR_NORSP_1, SIP_FOVR_NORSP_2, …,
SIP_FOVR_NORSP_8
Value Format Boolean
Description Specifies whether to perform the fail-over process when the unit detects
that the SIP server is not replying to SIP message.
Value Range
• Y (Enable fail-over)
• N (Disable fail-over)
Note
• If set to "Y", the unit will try to use the other SIP servers via the
DNS SRV and A records.
• If set to "N", the unit will not try to use the other SIP servers.
Default Value
N
SIP_FOVR_MAX_[1–8]
Parameter Name Example SIP_FOVR_MAX_1, SIP_FOVR_MAX_2, …, SIP_FOVR_MAX_8
Value Format Integer
Description Specifies the maximum number of servers (including the first [normal]
server) used in the fail-over process.
Value Range 1–4
Default Value 2
SIP_DNSSRV_ENA_[1–8]
Parameter Name Example SIP_DNSSRV_ENA_1, SIP_DNSSRV_ENA_2, …,
SIP_DNSSRV_ENA_8
Value Format Boolean
Description Specifies whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
188 Administrator Guide Document Version 2010-08
4.7.2 SIP Settings