Value Range
• G722
• PCMA (G.711 A-law)
• G726-32 (G.726 [32k])
• G729A
• PCMU (G.711 µ-law)
Note
• You can select each codec on once within [CODEC Settings].
• A maximum of 5 priorities can be assigned. If only 4 codecs are
specified in a configuration file, you will be able to select from
only 4 codecs, and [Fifth CODEC] will be disabled.
• The codec selections that are displayed may vary depending
on the unit or the operating environment.
Default Value PCMU
Configuration File Reference SDP_CODEC[0–4]_[1–8] (Page 169)
3.7 Telephone
This section provides detailed descriptions about all the settings classified under the [Telephone] tab.
3.7.1 Multi Number Settings
This screen allows you to assign phone numbers for incoming and outgoing calls to the base unit
(KX-TGP550 only) and handsets.
A maximum of 8 phone numbers can be assigned for each unit. A maximum of 6 handsets can be registered
to the base unit. For details, see 5.1 Line Settings for Base Unit and Handset.
Note
• You can configure these settings even in the following cases:
– The line has not been leased, or the unit has not been configured yet.
Document Version 2010-08 Administrator Guide 101
3.7.1 Multi Number Settings
To Next Page
Loading...
