Panasonic KX-TGP500B04 - Page 51

Configuring Settings from the Base Unit (KX-TGP550 only)/Handset
To open the unit’s Web port
In cases when buttons/soft key icons are shown in English alphabet
1. Base unit: [MENU] (middle soft key) ® [#][5][3][4]
Handset: [MENU] (center of joystick) ® [#][5][3][4]
2. [ ]/[ ]: Select "On" for "Embedded web" ® [SAVE]
3. Base unit: [EXIT]
Handset: [OFF]
In cases when buttons/soft key icons are shown in symbols/pictures
1. Base unit: (middle soft key) ® [#][5][3][4]
Handset: (center of joystick) ® [#][5][3][4]
2. [ ]/[ ]: Select "On" for "Embedded web" ®
3. Base unit: [ ]
Handset: [
]
To close the unit’s Web port
In cases when buttons/soft key icons are shown in English alphabet
1. Base unit: [MENU] (middle soft key) ® [#][5][3][4]
Handset: [MENU] (center of joystick) ® [#][5][3][4]
2. [ ]/[ ]: Select "Off" for "Embedded web" ® [SAVE]
3. Base unit: [EXIT]
Handset: [OFF]
In cases when buttons/soft key icons are shown in symbols/pictures
1. Base unit: (middle soft key) ® [#][5][3][4]
Handset: (center of joystick) ® [#][5][3][4]
2. [ ]/[ ]: Select "Off" for "Embedded web" ®
3. Base unit: [ ]
Handset: [
]
Configuring Settings from the Web User Interface
To close the unit’s Web port
1. In the Web user interface, click [Web Port Close].
2. Click OK.
Note
• The Web port of the unit will be closed automatically in the following conditions:
– The port close timer configured through the Web user interface expires (® see [Port Close
Timer] in 3.5.4.1 Web Server Settings).
– 3 consecutive unsuccessful login attempts occur.
Document Version 2010-08 Administrator Guide 51
3.2.1 Before Accessing the Web User Interface