Panasonic KX-UTG200

Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Note
• This value must be the same as the value entered in [New
Password].
Default Value Not stored.
Configuration File Reference ADMIN_PASS (Page 219)
4.4.3 User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
• For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
4.4.3.1 User Password
Current Password
Description Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference USER_PASS (Page 220)
New Password
Description Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Document Version 2014-05 Administrator Guide 101
4.4.3 User Password