Panasonic KX-UTG200

Description Specifies the dual-tone frequencies, in hertz, of Dial Tone 4 (stutter dial
tones) to notify that a voice mail is waiting, using 2 whole numbers
separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 350,440
Web User Interface Reference Tone Frequencies (Page 149)
DIAL_TONE4_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of Dial Tone 4 (stutter-type dial tone).
Value Range (-80)–0
Default Value 0
DIAL_TONE4_RPT
Value Format Boolean
Description Specifies whether Dial Tone 4 (stutter-type dial tone) is repeated.
Value Range
• Y (Repeat)
• N (No Repeat)
Default Value N
DIAL_TONE4_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones)
to notify that a voice mail is waiting, using up to 22 whole numbers (off
1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Web User Interface Reference Tone Timings (Page 150)
Document Version 2014-05 Administrator Guide 269
5.5.6 Tone Settings