Panasonic KX-UTG200

Synchronization Interval
Description Specifies the interval, in seconds, between synchronizations with the
NTP server.
Value Range 10–86400
Default Value 43200
Configuration File Reference TIME_SYNC_INTVL (Page 251)
NTP Server Address
Description Specifies the IP address or FQDN of the NTP server.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference NTP_ADDR (Page 250)
Time Zone
Description Selects your time zone.
Value Range GMT -12:00–GMT +13:00
Default Value GMT
Configuration File Reference TIME_ZONE (Page 220)
4.4.5.2 Daylight Saving Time
Enable DST
Description Selects whether to enable DST (Summer Time).
Value Range
• Yes
• No
Default Value No
Configuration File Reference DST_ENABLE (Page 221)
DST Offset
Description Specifies the amount of time, in minutes, to change the time when
[Enable DST (Enable Summer Time)] is set to [Yes].
Value Range 0–720
Default Value 60
Configuration File Reference DST_OFFSET (Page 221)
Document Version 2014-05 Administrator Guide 105
4.4.5 Time Adjust Settings