Panasonic KX-UTG200

4.3.5.2 IEEE802.1X Authentication
Authentication Protocol
Description Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range
• EAP-MD5
• EAP-TLS
• EAP-FAST
• EAP-PEAP-GTC
• EAP-PEAP-MSCHAPv2
• EAP-TTLS-GTC
• EAP-TTLS-MSCHAPv2
Default Value EAP-MD5
Configuration File Reference IEEE8021X_AUTH_PRTCL (Page 248)
Authentication ID
Description Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_ID (Page 248)
Authentication Password
Description Specifies the authentication password used for IEEE 802.1X
authentication.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_PASS (Page 248)
Document Version 2014-05 Administrator Guide 93
4.3.5 IEEE802.1X Settings