Panasonic KX-UTG200

Value Range 0–86400, 0: Forever
Default Value 0
Configuration File Reference MPAGE_SEND_TIMER (Page 263)
Disconnect Paging Timeout
Description Specifies the disconnect paging timeout for multicast paging.
Value Range 1–10
Default Value 1
Configuration File Reference MPAGE_DISC_TIM (Page 263)
Paging Codec
Description Specifies the codec used for multicast paging.
Value Range
• G722
• PCMA
• G726-32
• G729A
• PCMU
Default Value G722
Configuration File Reference MPAGE_CODEC (Page 263)
Paging DND
Description Specifies whether paging DND is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference MPAGE_DND_ENABLE (Page 263)
Address (No. 1-10)
Description Specifies the addresses used for multicast paging.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference MPAGE_ADDR (Page 261)
154 Administrator Guide Document Version 2014-05
4.6.7 Telephone Settings