Panasonic KX-UTG200

Value Range Max. 127 characters
Note
• You cannot leave this field empty if [No Answer (Enable Call
Forward)] is set to [Yes].
Default Value Not stored.
Configuration File Reference FWD_NO_ANSWER_NUMBER (Page 295)
No Answer (Ring Count)
Description Specifies the number of times that an incoming call rings until the call
is forwarded.
Note
• If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range 0, 2–20 (0: No ring)
Default Value 3
Configuration File Reference FWD_NO_ANSWER_TIMEOUT (Page 295)
4.6.2.5 Call Park & Call Pickup
Call Park (Enable)
Description Specifies whether call park is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference PARK_ENABLE (Page 295)
Call Park (Code)
Description Specifies the code used for call park.
Value Range Max. 32 characters (0-9, *, #)
Default Value Not stored.
Configuration File Reference PARK_CODE (Page 295)
Document Version 2014-05 Administrator Guide 139
4.6.2 Call Control [Line 1]–[Line n]