Panasonic KX-UTG200

DNS1
Description Specifies the IP address of the primary DNS server.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 25)
DNS2
Description Specifies the IP address of the secondary DNS server.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 25)
4.3.3 IPv6 Network Settings
This screen allows you to change the IPv6 settings.
86 Administrator Guide Document Version 2014-05
4.3.3 IPv6 Network Settings