Panasonic KX-UTG200

Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This setting is available only when "DTMF_MODE" is set to
"Y".
Value Range 96–127
Default Value 101
Web User Interface Reference Telephone-event Payload Type (Page 123)
RFC2543_HOLD_ENABLE
Value Format Boolean
Description Specifies whether to enable the RFC 2543 Call Hold feature on this line.
Value Range
• Y (Enable RFC 2543 Call Hold)
• N (Disable RFC 2543 Call Hold)
Note
• If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
• If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Default Value
Y
Web User Interface Reference Supports RFC 2543 (c=0.0.0.0) (Page 123)
MAX_CONNECTION
Value Format Integer
Description Specifies the MAX connections per line.
Value Range 1–24
Default Value 4
Web User Interface Reference Max Connection (Page 120)
VQM_PUBLISH
Value Format Boolean
Description Specifies whether to enable/disable VQM PUBLISH.
Value Range
• Y (Enable VQM publish)
• N (Disable VQM publish)
Default Value
N
288 Administrator Guide Document Version 2014-05
5.7.1 Per Line - VoIP