113
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures with Exposure Compensation
●
In Manual Exposure Mode, you can correct the exposure only when the ISO sensitivity is set to
[AUTO].
●
Settings can be made within a range of –3 EV to +3 EV while recording motion pictures, recording
4K photos, or recording in [Post Focus].
●
When [Auto Exposure Comp.] of [Flash] in the [Rec] menu is set to [ON], the flash output is also
automatically adjusted based on the exposure compensation value.
●
Depending on the brightness, this may not be possible in some cases.
●
When the Exposure Compensation value is out of the –3 EV to +3 EV range, the brightness of
the recording screen will no longer change. You can apply the exposure compensation value by
pressing the shutter button halfway or pressing the [AF/AE LOCK] button to lock exposure.
●
The set Exposure Compensation value is stored even if the camera is turned off. (When [Exposure
Comp. Reset] is set to [OFF])
To Next Page
Loading...
