112
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures with Exposure Compensation
Recording mode:
Corrects the exposure when there is a backlight or when the subject is too dark or too
bright.
1
Rotate the Exposure Compensation dial
to compensate the exposure
• You can set the exposure compensation value in the
range between –3 EV and +3 EV.
Under-exposed
Optimum
exposure
Over-exposed
Adjust the
exposure to the [+]
direction
Adjust the
exposure to the [-]
direction
■
Extending the Exposure Compensation value (Compensating the exposure with
the rear dial)
Preparation
Disable the Exposure Compensation dial
→ [Custom] → [Operation] → [Dial Set.] → [Exposure Dial] → [OFF]
Press the rear dial to switch to Exposure Compensation operation
Rotate the rear dial to compensate the exposure
Exposure Bracket
Exposure Compensation
[Flash Adjust.]
• You can set the Exposure Compensation value in the range
between –5 EV and +5 EV.
• Press
to set the Exposure Bracket. (→142)
• You can set [Flash Adjust.] (→167) by rotating the front dial.
(Press [DISP.] button to switch the operations of rear dial and front
dial.)
OFF
Press the rear dial to set
• When [Exposure Comp.] in [Dial Set.] is set to [
] (front dial) or [ ] (rear dial), you
can compensate the exposure simply by rotating the set dial in the same manner as
Exposure Compensation dial operation. (→49)
To Next Page
Loading...
