49
Basics
Buttons/Dials Used for Recording
■
Setting the operation methods of the front dial and rear dial
→ [Custom] → [Operation] → [Dial Set.]
[Assign Dial (F/SS)] Assigns the operations of the dials in Manual Exposure Mode.
[
F SS]:
Assigns the aperture value to the front dial, and the shutter speed to the
rear dial.
[
SS F]:
Assigns the shutter speed to the front dial, and the aperture value to the
rear dial.
[Rotation (F/SS)] Changes the rotation direction of the dials for adjusting the aperture
value and shutter speed.
[
] / [ ]
[Exposure Dial] [ON]: Compensates the exposure with the Exposure Compensation dial.
(–3 EV to +3 EV)
[OFF]: The Exposure Compensation dial is disabled.
• When [Exposure Dial] is set to [OFF], the Exposure Compensation
screen can be displayed by pressing the rear dial. (–5 EV to +5 EV)
(→112)
[Exposure Comp.] Assigns the Exposure Compensation to the front dial or the rear dial so
that appropriate exposure can be achieved simply by rotating them when
[Exposure Dial] is set to [OFF]. (–5 EV to +5 EV)
[
] (Front Dial) / [ ] (Rear Dial) / [OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials when you
press the function button to which [Dial Operation Switch] is assigned.
[
] ([Front Dial Operation]) / [ ] ([Rear Dial Operation])
• Items that can be set are as follows.
– [4K Photo Mode]
– [Photo Style]
– [Filter Effect]
– [Aspect Ratio]
– [AF Mode]
– [Highlight Shadow]
– [i.Dynamic]
– [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
– [White Balance]
– [Drive Mode]
• [Highlight Shadow] uses the two dials.
To Next Page
Loading...
