264
Wi-Fi/Bluetooth
Controlling with a Smartphone
■
Required wireless connectivity mode
The wireless connectivity mode required varies depending on the function to be used
after connecting to a smartphone.
Wireless connectivity
required
Support for Bluetooth low energy
Indicates that the function can be used with smartphones that support
Bluetooth low energy.
Indicates that the function can be used with smartphones that do not
support Bluetooth low energy.
Indicates that the function can be used with smartphones that support
Bluetooth low energy.
• Indicates that the function requires you to connect to a smartphone
using both Bluetooth and Wi-Fi.
Turning on/off the camera using a smartphone
Wireless connectivity required:
Even when the camera is turned off, you can remotely turn
on and operate it from your smartphone. This function allows
you to turn on the camera from a distant location and take
pictures or view images on the camera even when it is in your
bag.
1
Make a Bluetooth connection to the smartphone (→257)
2
Select the camera’s menu
→ [Setup] → [Bluetooth] → [Remote Wakeup] → [ON]
3
Set the Camera [ON/OFF] switch to [OFF]
4
On the smartphone, start up the “Image App”, and set the Bluetooth function to
a state in which a connection can be made (standby state)
5
Operate the smartphone
Select [ ]
Select [Remote operation]
• The camera automatically turns on, allowing it to make a Wi-Fi connection automatically.
– (iOS devices) Depending on the connection status of the smartphone, you may need to
change the connected device on the Wi-Fi setup screen. Follow the on-screen message on
the smartphone to change the setting.
To Next Page
Loading...
