227
Using Menu Functions
Menu list
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
] ([4K Pre-Burst]) of the 4K Photo function
• When recording in [Multi Exp.]
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
• While the HDMI output is being used for recording.
●
When using the AC adaptor (optional) and DC coupler (optional), [Sleep Mode],
[Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting] is disabled.
[Monitor Display Speed]
Sets the display speed of the monitor.
[30fps] Minimises power consumption and the operating time is extended.
[60fps] You can display a moving subject in fluid motion.
●
The [Monitor Display Speed] setting does not affect the recorded picture.
●
The viewfinder is fixed to [60fps].
[Monitor Display] / [Viewfinder]
Adjust brightness and colour of the monitor or viewfinder.
[Brightness] Adjusts the brightness.
[Contrast] Adjusts the contrast.
[Saturation] Adjusts the vividness of colours.
[Red Tint] Adjusts red hues.
[Blue Tint] Adjusts blue hues.
●
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
→ [Setup]
To Next Page
Loading...
