VQT1Z56
112
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P26)
Note
•
Audio dubbing may not work properly on pictures recorded by other equipment.
• Audio dubbing does not work on motion pictures and protected pictures.
• Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P26)
Note
•
Cleared information regarding the [FACE RECOG.] cannot be restored.
• Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for
[CATEGORY PLAY].
• Clearing of [FACE RECOG.] cannot be done of the protected image.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
• The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
• Audio is recorded from the built-in microphone on the camera.
• If you press [‚], the audio dubbing is cancelled.
Press [MENU/SET] to stop recording.
• It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
[FACE RECOG.]
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES] and then press [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
DMC-FT1&TS1EB-VQT1Z56_eng.book 112 ページ ２００９年２月２日 月曜日 午前９時４７分
To Next Page
Loading...
