EasyManuals Logo

Panasonic LUMIX DMC-FT1 User Manual

Panasonic LUMIX DMC-FT1
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
VQT1Z56
64
Advanced (Recording pictures)
To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2 of the “Birthday/Name setting” procedure.
Note
It will be set to [PORTRAIT] when recording a motion picture.
The age and name can be printed out using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled
software on the CD-ROM (supplied).
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to .
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO1600].
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
If the age is not properly displayed, check the clock and birthday settings.
The birthday setting and name setting can be reset with [RESET].
The initial setting for [AF MODE] is [š].
LED light is fixed to [ ].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P104).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P63.
Note
It will be a normal motion picture recording during the motion picture recording.
The initial setting for the AF assist lamp is [OFF].
The initial setting for [AF MODE] is [ ].
Refer to [BABY1]/[BABY2] for other information about this mode.
Select this when you want to take pictures of sunset view. This allows you to take vivid
pictures of the red colour of the sun.
Note
The flash setting is fixed to [Œ].
This mode minimises the jitter of the subjects, and enables you to take pictures of these
subjects in dimly lit rooms. (Select this for high-sensitivity processing. The sensitivity
automatically switches to between [ISO1600] and [ISO6400].)
Picture size and aspect ratio
1 Press 3/4 to select the picture size and aspect ratio and then press
[MENU/SET] to set.
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
2 Take pictures.
Note
[QUALITY] is automatically fixed to [].
You can take pictures suitable for 4qk6q/10k15 cm printing.
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to .
í [PET]
ï [SUNSET]
9 [HIGH SENS.]
DMC-FT1&TS1EB-VQT1Z56_eng.book 64 ペー 009年2月2日 月曜日 午前9時47分

Table of Contents

Other manuals for Panasonic LUMIX DMC-FT1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FT1 and is the answer not in the manual?

Panasonic LUMIX DMC-FT1 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom36 x
Optical zoom4.6 x
Fixed focal length35 mm
Focal length range4.9 - 22.8 mm
Number of aspheric elements5
Interfacemini HDMI
Digital SLRNo
Built-in flashYes
Dimensions (WxDxH)98.3 x 23 x 61.3 mm
Camera shutter speed8 - 1/1300 s
Effective sensor resolution12.7 pixels
Focal length (35mm film equivalent)28 - 128 mm
Normal focusing range0.3 - ∞ m
Macro focusing range (tele)0.3 m
Macro focusing range (wide)0.05 m
Internal memory40 MB
Compatible memory cardsmmc, sd
Maximum video resolution320 x 240 pixels
Display diagonal2.7 \
USB version2.0
Product colorGold
Flash modesauto, fill-in, manual, Red-eye reduction
Light exposure modesauto, manual
Camera shutter typeelectronic, mechanical
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width98.3 mm
Height61.3 mm
Weight183.8 g

Related product manuals