EasyManuals Logo

Panasonic LUMIX DMC-FT1 User Manual

Panasonic LUMIX DMC-FT1
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
VQT1Z56
134
Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[THIS MEMORY CARD IS LOCKED]
> The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are
moved to [LOCK]. Move the switch back to unlock it. (P22)
[NO VALID PICTURE TO PLAY]
> Record a picture or insert a card with a recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
> Delete the picture after cancelling the protect setting. (P111)
[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]
Pictures not based on the DCF standard cannot be deleted.
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P33)
[NO ADDITIONAL SELECTIONS CAN BE MADE]
The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETE MULTI] (P47), [FAVORITE] (P109), [TITLE EDIT] (P103), [TEXT STAMP] (P104) or
[RESIZE] (P106) has been exceeded.
> Reduce the number of pictures set, and then repeat the operation.
More than 999 favourites have been set.
[CANNOT BE SET ON THIS PICTURE]
[TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE
CARD]
There is no space left on the built-in memory or the card.
When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]
The following pictures cannot be copied.
When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)
Files not based on the DCF standard.
Moreover, pictures recorded or edited by other equipment may not be copied.
[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?]
This message will be displayed when you formatted the built-in memory on a PC.
> Format the built-in memory on the camera again. (P33) The data on the built-in memory
will be deleted.
DMC-FT1&TS1EB-VQT1Z56_eng.book 134 ペー 009年2月2日 月曜日 午前9時47分

Table of Contents

Other manuals for Panasonic LUMIX DMC-FT1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FT1 and is the answer not in the manual?

Panasonic LUMIX DMC-FT1 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom36 x
Optical zoom4.6 x
Fixed focal length35 mm
Focal length range4.9 - 22.8 mm
Number of aspheric elements5
Interfacemini HDMI
Digital SLRNo
Built-in flashYes
Dimensions (WxDxH)98.3 x 23 x 61.3 mm
Camera shutter speed8 - 1/1300 s
Effective sensor resolution12.7 pixels
Focal length (35mm film equivalent)28 - 128 mm
Normal focusing range0.3 - ∞ m
Macro focusing range (tele)0.3 m
Macro focusing range (wide)0.05 m
Internal memory40 MB
Compatible memory cardsmmc, sd
Maximum video resolution320 x 240 pixels
Display diagonal2.7 \
USB version2.0
Product colorGold
Flash modesauto, fill-in, manual, Red-eye reduction
Light exposure modesauto, manual
Camera shutter typeelectronic, mechanical
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width98.3 mm
Height61.3 mm
Weight183.8 g

Related product manuals