EasyManuals Logo

Panasonic LUMIX DMC-FT1 User Manual

Panasonic LUMIX DMC-FT1
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
53
VQT1Z56
Advanced (Recording pictures)
Note
If you bring the flash too close to an object, the object may be distorted or discoloured by the
heat or lighting from the flash.
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor
turns off and the status indicator lights.
The white balance may not be properly adjusted if the flash level is insufficient for the subject.
When the shutter speed is fast, the flash effect may not be sufficient.
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
The red-eye reduction effect differs between people. Also, if the subject was far away from the
camera or was not looking at the first flash, the effect may not be evident.
[REC] mode: ·
Taking Close-up Pictures
This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of
flowers. You can take pictures of a subject as close as 5 cm (0.17 feet) from the lens by
sliding the zoom lever upmost to Wide (1k). (AF macro mode)
You can take a picture with the digital zoom up to 3k while maintaining the distance to the
subject for the extreme Wide position [5 cm (0.17 feet)]. (Macro zoom mode)
Press 4 [#].
Press 3/4 to select a mode.
Press [MENU/SET].
You can also press the shutter button halfway to
finish.
The menu screen disappears after about 5 seconds.
At this time, the selected item is automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
A Focus range
[ ] is displayed during AF Macro mode and [ ]
is displayed during Macro zoom mode.
To cancel, select the [OFF] in step 2.
Zoom range, focus range, and zoom magnification are displayed during zooming. Zoom
range will be displayed in blue (digital zoom range) during Macro zoom mode.
A
DMC-FT1&TS1EB-VQT1Z56_eng.book 53 ペー 009年2月2日 月曜日 午前9時47分

Table of Contents

Other manuals for Panasonic LUMIX DMC-FT1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FT1 and is the answer not in the manual?

Panasonic LUMIX DMC-FT1 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom36 x
Optical zoom4.6 x
Fixed focal length35 mm
Focal length range4.9 - 22.8 mm
Number of aspheric elements5
Interfacemini HDMI
Digital SLRNo
Built-in flashYes
Dimensions (WxDxH)98.3 x 23 x 61.3 mm
Camera shutter speed8 - 1/1300 s
Effective sensor resolution12.7 pixels
Focal length (35mm film equivalent)28 - 128 mm
Normal focusing range0.3 - ∞ m
Macro focusing range (tele)0.3 m
Macro focusing range (wide)0.05 m
Internal memory40 MB
Compatible memory cardsmmc, sd
Maximum video resolution320 x 240 pixels
Display diagonal2.7 \
USB version2.0
Product colorGold
Flash modesauto, fill-in, manual, Red-eye reduction
Light exposure modesauto, manual
Camera shutter typeelectronic, mechanical
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width98.3 mm
Height61.3 mm
Weight183.8 g

Related product manuals