EasyManuals Logo

Panasonic LUMIX DMC-FT1 User Manual

Panasonic LUMIX DMC-FT1
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
VQT1Z56
90
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P26.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Applicable modes:
ñ· ¿
¢ The burst speed is constant regardless of the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
When the burst mode setting is set to Unlimited
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
You can take pictures until the capacity of the built-in memory or the card is full.
The focus is fixed when the first picture is taken.
When the burst speed is set to [˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[ò], they are adjusted each time you take a picture.
When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
Burst mode is not cancelled when the camera is switched off.
If you take pictures in burst mode with the built-in memory, it will take time to write the picture
data.
[Œ] is set for the flash when burst is set.
Auto bracket is cancelled when burst is set.
Burst cannot be used in [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST],
[FLASH BURST], [STARRY SKY], [PIN HOLE] or [FILM GRAIN] in scene mode.
˜ [BURST]
[OFF] ˜ ò
Burst speed (pictures/
second)
approx. 2.3
¢
approx. 1.8
Number of
recordable
pictures
A
—max. 3
Depends on the
remaining capacity of the
built-in memory/card.
—max. 5
DMC-FT1&TS1EB-VQT1Z56_eng.book 90 ペー 009年2月2日 月曜日 午前9時47分

Table of Contents

Other manuals for Panasonic LUMIX DMC-FT1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FT1 and is the answer not in the manual?

Panasonic LUMIX DMC-FT1 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom36 x
Optical zoom4.6 x
Fixed focal length35 mm
Focal length range4.9 - 22.8 mm
Number of aspheric elements5
Interfacemini HDMI
Digital SLRNo
Built-in flashYes
Dimensions (WxDxH)98.3 x 23 x 61.3 mm
Camera shutter speed8 - 1/1300 s
Effective sensor resolution12.7 pixels
Focal length (35mm film equivalent)28 - 128 mm
Normal focusing range0.3 - ∞ m
Macro focusing range (tele)0.3 m
Macro focusing range (wide)0.05 m
Internal memory40 MB
Compatible memory cardsmmc, sd
Maximum video resolution320 x 240 pixels
Display diagonal2.7 \
USB version2.0
Product colorGold
Flash modesauto, fill-in, manual, Red-eye reduction
Light exposure modesauto, manual
Camera shutter typeelectronic, mechanical
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width98.3 mm
Height61.3 mm
Weight183.8 g

Related product manuals