Panasonic LUMIX DMC-FT1 - Setting Menu Items

VQT1Z56
26
Preparation
This section describes how to select the normal picture mode settings, and the same
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the normal picture mode
Setting menu items
Press and hold down the ON/OFF button.
A [(] button
B [MENU/SET] button
C Mode dial
Set the mode dial to [·].
• To set the playback menu, proceed to step 3 by
pressing the [(].
Press [MENU/SET] to display the menu.
• You can switch menu screens from any menu item by
sliding the zoom lever.
Switching to other menus
e.g.: Switching to the [SETUP] menu
Press 2.
Press 4 to select the [SETUP] menu
icon [ ].
Press 1.
• Select a menu item next and set it.
ON/OFF
MENU
/SET
DMC-FT1&TS1EB-VQT1Z56_eng.book 26 ページ ２００９年２月２日 月曜日 午前９時４７分