VQT1Z56
72
Advanced (Recording pictures)
∫ Face detection
When [ ] is selected, the camera automatically detects a person’s face, and it will adjust
the focus and exposure (P88).
Note
•
Following [MOTION PICTURE] mode menu cannot be set because the camera sets
automatically.
[WHITE BALANCE]/[I.EXPOSURE]
• It is only possible to set the [COLOR MODE] to [STANDARD], [B/W], or [SEPIA].
• Due to conditions such as the ones below, a different scene may be identified for the same
subject.
– Subject conditions: When the face is bright or dark, The size of the subject, The distance to
the subject, The contrast of the subject, When the subject is moving, When zoom is used
– Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken
• To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate recording mode.
• Face detection may become slower or it may not detect underwater.
Press 3/4 to select the item and then press
[MENU/SET].
Press
3
/
4
to select [REC QUALITY] and then press
1
.
Changing [REC MODE] and [REC QUALITY]
Select [REC MODE] from the [MOTION PICTURE]
mode menu, and press 1. (P26)
Recording format Effect
[AVCHD Lite]
This is the data format appropriate to playback on the high
definition TV, etc. High definition motion picture can be
recorded for long time.
[MOTION JPEG]
This is the data format appropriate to playback on the PC,
etc. It can be recorded with small picture size, making it
convenient when there is not much space left on the
memory card or when you want to attach the motion picture
to an e-mail on the PC later.
DMC-FT1&TS1EB-VQT1Z56_eng.book 72 ページ ２００９年２月２日 月曜日 午前９時４７分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
