EasyManuals Logo

Panasonic LUMIX DMC-FT1 User Manual

Panasonic LUMIX DMC-FT1
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
VQT1Z56
Before Use
Caution for AC mains lead
For your safety, please read the following
text carefully.
This appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced
please ensure that the replacement fuse
has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI
mark Ì on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be
purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13-
AMPERE SOCKET.
If a new plug is to be fitted please
observe the wiring code as stated below.
If in any doubt please consult a qualified
electrician.
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Blue must be
connected to the terminal which is marked
with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be
connected to the terminal which is marked
with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL
WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR
COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF-
KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug (figures A and
B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC
mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach
the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
DMC-FT1&TS1EB-VQT1Z56_eng.book 3 ペー 2009年2月2日 月曜日 午前9時47

Table of Contents

Other manuals for Panasonic LUMIX DMC-FT1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FT1 and is the answer not in the manual?

Panasonic LUMIX DMC-FT1 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom36 x
Optical zoom4.6 x
Fixed focal length35 mm
Focal length range4.9 - 22.8 mm
Number of aspheric elements5
Interfacemini HDMI
Digital SLRNo
Built-in flashYes
Dimensions (WxDxH)98.3 x 23 x 61.3 mm
Camera shutter speed8 - 1/1300 s
Effective sensor resolution12.7 pixels
Focal length (35mm film equivalent)28 - 128 mm
Normal focusing range0.3 - ∞ m
Macro focusing range (tele)0.3 m
Macro focusing range (wide)0.05 m
Internal memory40 MB
Compatible memory cardsmmc, sd
Maximum video resolution320 x 240 pixels
Display diagonal2.7 \
USB version2.0
Product colorGold
Flash modesauto, fill-in, manual, Red-eye reduction
Light exposure modesauto, manual
Camera shutter typeelectronic, mechanical
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width98.3 mm
Height61.3 mm
Weight183.8 g

Related product manuals