- 121 -
Wi-Fi
Required steps
1 Install “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” on your PC.
•
Refer to the separate “Basic Operating Instructions” for further information on operating
environments or installation.
2 Display the SSID and encryption key of this camera. (P132)
3 Enter the encryption key of this camera into your PC.
4 Select images to send. (P141, 142)
5 Set the PC as the destination, and send the images. (P143)
Send images to your PC
This camera PC
Step 2 4 5 Step 1 3