- 131 -
Wi-Fi
∫ Set the first wireless access point (broadband router) to connect to
When several wireless access points (broadband router) are saved, changing settings so
the wireless access point (broadband router) that is used most often is connected first
adds convenience.
•
If the set wireless access point (broadband router) cannot be found, connections will be made
in the order displayed on the screen.
1 Select [Manual Setup] in the [Wi-Fi Setup] menu.
2 Touch [Wireless settings].
∫ Delete a saved wireless access point (broadband router)
1 Select [Manual Setup] in the [Wi-Fi Setup] menu.
2 Touch [Wireless settings].
Note
•
Up to 8 wireless access points (broadband router) can be saved.
• Check the wireless access points (broadband router) instruction manual and settings when a
saving wireless access point (broadband router).
• If no connection can be established, the wireless access point's (broadband router) radio
waves may be too weak. Refer to
“Message Display” (P169) and “Troubleshooting” (P172) for
details.
• Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
3 Touch [Set default].
4 Touch the wireless access point (broadband
router) you want to set.
•
Close the menu after changing settings.
3 Touch [Delete].
4 Touch the wireless access point (broadband
router) you want to delete.
•
Confirmation screen is displayed. It is executed when
[Yes] is selected.
Exit the menu after it is executed.
To Next Page
Loading...
Need help?
General
