Panasonic Lumix DMC-FX90EB User Manual

Wi-Fi
- 130 -
1 Touch the wireless access point (broadband
router) you are connecting to.
•
Touching [Update] will search for a wireless access
point (broadband router) again.
2 (If network authentication is encrypted) Enter the
encryption key and touch [Set].
•
A message is displayed when the wireless access point
(broadband router) has been saved.
∫ Connect with [Add wireless AP]
Connect with [Add wireless AP] if the wireless access
point (broadband router) you want to connect to is not displayed in the list in the screen of
step
1 of “When connecting with [Search Wireless AP]”.
1 Touch [Add wireless AP] in the screen for step 1 of “When connecting with
[Search Wireless AP]”.
2 Enter the SSID of the wireless access point (broadband router) you are
connecting to and touch [Set].
•
For details on how to enter characters, refer to “Entering Text” section on P72.
3 Touch network authentication type.
•
For information on network authentication, see the manual of the wireless access point
(broadband router).
4 Touch encryption type.
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
¢A message is displayed when the access point has been saved.
5 (When an option other than [No Encryption] is selected) Enter the encryption
key and touch the [Set].
•
A message is displayed when the wireless access point (broadband router) has been
saved.
When connecting with [Search Wireless AP]
Network authentication
type
Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]
¢
/[WEP]

Panasonic Lumix DMC-FX90EB Specifications

General

Brand	Panasonic
Model	Lumix DMC-FX90EB
Category	Digital Camera
Language	English