Application (Record)
Using the [Rec] menu
VQT5B76
- 148 -
• For the setting procedures of the menu. (→57)
[Metering Mode]
Type of optical measurement to measure brightness can be changed.
■
Settings
[Metering Mode] Brightness measurement position Conditions
[Multi Metering]
Whole screen
Normal usage (produces balanced
pictures)
[Center Weighted]
Center and surrounding area Subject in center
[Spot]
Center and close surrounding area
Great difference between
brightness of subject and
background
(e.g. person in spotlight on stage,
backlighting)
[i.Dynamic]
This function automatically adjusts contrast and exposure to produce pictures with
closer-to-actual colors when there is a significant difference between light and dark in the
background and the subject.
■
Settings: [HIGH] / [STANDARD] / [LOW] / [OFF]
●
If [i.Dynamic] is activated even when [Sensitivity] is set to [100], pictures may be
recorded with an ISO Sensitivity higher than [100].
●
Compensation effect may not be achieved depending on the conditions.
●
Cannot be set in the following case.
• When the [Quality] setting is set to [ ], [ ] or [ ]
To Next Page
Loading...
