Basics
Using the [Setup] menu
VQT5B76
- 63 -
• For the setting procedures of the menu. (→57)
[Monitor Display] / [Viewfinder]
Brightness, color, or red or blue tint of the LCD monitor/viewfinder is adjusted.
■
Settings
[Brightness] Adjust the brightness.
[Contrast · Saturation] Adjust the contrast or clarity of colors.
[Red Tint] Adjust the red tint.
[Blue Tint] Adjust the blue tint.
Press to select the setting item and press to make adjustments
Press [MENU/SET]
●
It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder
when the viewfinder is in use.
●
Some subjects may look different from their actual appearance, but the recorded
picture will not be affected.
[Monitor Luminance]
These menu settings make it easier to see the LCD monitor when you are in bright
places.
■
Settings
([Auto Power Monitor])
The brightness is adjusted automatically depending on how bright it
is around the camera.
([Power Monitor])
The brightness becomes higher than usual for easy viewing outdoors.
[OFF] —
●
Cannot select [ ] ([Auto Power Monitor]) in playback mode.
●
[ ] ([Power Monitor]) returns to ordinary brightness if there is no operation for
30 seconds when recording. (Press any button to make the screen brighter again.)
●
Because the picture shown on the LCD monitor screen emphasizes brightness, some
subjects may look different than their actual appearance, but this will not affect the
recorded picture.
●
Setting [Monitor Luminance] reduces the operating time.
To Next Page
Loading...
