Application (Record)
Taking pictures with the built-in flash
VQT5B76
- 79 -
Changing the setting of the flash
Select [Flash] in the [Rec] menu
 • For the setting procedures of the menu. (→57)
Press     to select a type and press [MENU/SET]
Type, operations Uses
*
1
[Auto]
 • Automatically judges whether or not to flash
Normal use
[Auto/Red-Eye]
*
2
 • Automatically judges whether or not to flash 
(reduce red-eye)
Taking pictures of subjects in dark 
places
[Forced Flash On]
 • Always flash
Taking pictures with backlight or 
under bright lighting (e.g. fluorescent)
[Slow Sync./Red-Eye]
*
2
 • Automatically judges whether or not to flash 
(reduce red-eye; slow shutter speed to take 
brighter pictures)
Taking pictures of subjects against a 
nightscape (tripod recommended)
*
3
[Forced Flash Off]
 • Never flash
Places where flash use is prohibited
*
1
 Only in the [   ] mode
*
2
  Two flashes will be emitted. Do not move until after the second flash. Interval between flashes 
varies according to brightness of subject. 
When [Red-Eye Removal] in the [Rec] menu is set to [ON], the icon changes to [
]/[ ], red-
eye is automatically detected and the picture data is corrected. (only if the camera has detected a 
face)
*
3
  This setting is not displayed in the menu. When you close the flash, [   ] is automatically set.