Others
Optional accessories
VQT5B76
- 204 -
Protector/Filter (optional)
The MC protector (DMW-LMCH55: optional) is a transparent filter which affects neither 
the colors nor the amount of light, so it can always be used to protect the camera’s lens.
The ND filter (DMW-LNDH55: optional) reduces the amount of light to approximately 1/8th 
(equal to adjusting the aperture value 3 increments) without affecting the color balance.
PL filter (DMW-LPL55: optional) will suppress the reflected light from a metal or non 
spherical surfaces (flat non-metallic surfaces, water vapor or invisible particles in the air), 
making it possible to take a picture with enhanced contrast.
 ●
Do not attach multiple filters at the same time.
 ●
If the filter is tightened too much, you may not be able to remove it. Do not tighten it 
too much.
 ●
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it 
to the camera.
 ●
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise 
the focus may be adjusted to the lens, resulting in the subject being out of focus.
 ●
Refer to the operating instructions for each filter for details.