Basics
Taking pictures with automatic settings [Intelligent Auto] Mode
VQT5B76
- 37 -
Automatic Scene Detection
Camera reads scene when pointed at subject, and makes optimum settings automatically.
The icon of scene
detected
When taking pictures
[i-Portrait]
[i-Night Portrait]
*
2
(Only when the flash is opened)
[i-Baby]
*
1
[i-Night Scenery]
*
2
[i-Scenery]
[iHandheld Nite Shot]
*
3
[i-Sunset] [i-Macro]
When scene does not correspond to any of the above
When recording motion pictures
(→45)
[i-Portrait] [i-Low Light]
[i-Scenery] [i-Macro]
When scene does not correspond to any of the above
*
1
When children (that are registered in the camera with Face Recognition) under 3 years old are
recognized.
*
2
We recommend using a tripod and the self-timer.
*
3
When [iHandheld Nite Shot] is [ON].
●
Depending on recording conditions, different scene types may be determined for the
same subject.
●
If desired scene type is not selected, we recommend manually selecting the
appropriate scene mode.
●
When [ ], [ ] or [ ] is detected, Face Detection is activated, and the focus and
exposure are adjusted for the recognized faces.
●
If a tripod is used, for instance, and the camera has judged that camera shake is
minimal when the Scene Mode has been identified as [ ], the shutter speed will
be set to a maximum of 8 seconds. Take care not to move the camera while taking
pictures.
●
When [Face Recog.] is set to [ON], and the face similar to the registered face is
detected, [R] is displayed in the top right of [ ], [ ] and [ ].
■
About Backlight Compensation
Backlight compensation is automatically activated in [Intelligent Auto] mode. Backlight
is a condition where a light shines from behind a subject. When there is a backlight,
the subject appears darker and the camera will automatically attempt to correct it by
increasing the brightness of the picture. When the camera detects backlight, [ ] is
displayed on the LCD monitor. (Depending on the backlighting conditions, backlighting
may not be detected correctly.)
To Next Page
Loading...
