Basics
Sequence of operations
VQT5B76- 29 -
Basics
(Continued on the next page)
1
Turn the camera on
• The power lamp lights when you turn this unit on.
2
Set to the desired recording mode
Rotate the mode dial slowly to select the
desired mode.
→
■
Basic
[Program AE] Mode
Take pictures with automatic shutter speed and
aperture value settings. (→32)
[Intelligent Auto] Mode Take pictures with automatic settings. (→36)
■
Advanced
[Aperture-Priority] Mode Determine aperture, then record pictures. (→108)
[Shutter-Priority] Mode
Determine shutter speed, then record pictures.
(→109)
[Manual Exposure]
Mode
Determine aperture and shutter speed, then
record pictures. (→110)
[Creative Video Mode]
Record motion picture with manual settings.
(→132)
[Custom] Mode
Record pictures using pre-registered settings.
(→134)
[Panorama Shot] Mode Record panorama pictures. (→121)
[Scene Mode] Take pictures using Scene modes. (→124)
[Creative Control] Mode
Take pictures by selecting your preferred
picture effect. (→112)
To Next Page
Loading...
