Basics
Using the [Setup] menu
VQT5B76
- 67 -
• For the setting procedures of the menu. (→57)
[Expo.Meter]
You can set whether to display the exposure meter when
operations such as shutter speed and aperture value
adjustments or Exposure Compensation are performed.
■
Settings: [ON] / [OFF]
Exposure meter
●
If the exposure meter is not displayed, press the [DISP.] button to switch the display of
the LCD monitor/viewfinder.
●
The exposure meter will turn off if no operation is performed for approximately
4 seconds.
[Lens Resume]
●
[Zoom Resume]
When you turn this unit on, the zoom positions when you last turned this unit off are
automatically restored.
■
Settings: [ON] / [OFF]
●
[MF Resume]
It will memorize the MF position set with the Manual Focus. It will resume the
memorized Manual Focus position when you return to Manual Focus Recording.
■
Settings: [ON] / [OFF]
●
MF position will be memorized in the following cases:
• Turning the camera off
• When switching to a type of focus other than Manual Focus
• When switched to playback mode
●
Zoom position will be set all the way to wide when the [Zoom Resume] is set to [OFF].
●
When [MF Resume] is set to [OFF], MF position will be the distance focused at the
time of recording in Manual Focus.
●
Depending on the recording conditions, the memorized MF positions and resumed
MF positions might be different. Before you start recording, make sure the subject is
in focus.
To Next Page
Loading...
