64
Playing Back Images on a TV Monitor
Connecting the camera with a television
via supplied video cable
1
, it is possible to
play back and view the recorded images.
[Preparation]
• Turn the camera and the television off.
1
Connect
the video cable to the
V.OUT socket of the camera.
2
Connect the
video cable
to the video
in socket of the TV
.
3
Turn the television on and then
select the appropriate external
input
.
4
Turn the camera on
.
• The image is displayed on the
television.
Viewing images in other countries
When setting [VIDEO] on the menu, you can view images on the TV in
other countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO] to [PAL], the output signal is still
NTSC system.
• Do not use any other cables except the supplied one.
• Read the TV operating instructions too.
• Sound cannot be played back while playing back motion image recordings.
KC5.book64ページ２００２年４月１２日 金曜日 午前１０時８分
To Next Page
Loading...
