Application (Record)
Changing the settings assigned to the
control ring
VQT5A33- 118 -
■
Recording mode:
Changes the settings assigned to the control ring.
Select [Control Ring Set] from [Setup] menu and press
[MENU/SET] (→52)
Use cursor button to select the setting to change and press
[MENU/SET]
●
Settings that can be assigned
• [Step Zoom] (→74)
• [Exposure Comp.] (→90)
• [Aspect Ratio] (→128)
• [Sensitivity] (→130)
• [White Balance] (→131)
●
To return to the default setting, select [Default Control] from [Control Ring Set].
●
The changed setting may not work depending on the recording mode.
●
The control ring cannot be used to adjust Manual Focus if the control ring settings
have been changed.
●
For [Intelligent Auto] Mode, the setting is fixed to [Step Zoom].
To Next Page
Loading...
