Connecting with other devices
Printing
VQT5A33- 255 -
Preparation:
• When printing pictures from the
built-in memory, remove any memory
cards.
• Adjust the print quality or other
settings on your printer, as needed.
• Turn on the camera and printer.
Connect camera to printer
• Do not use any other USB connection cables except the supplied one or a
genuine Panasonic USB connection cable (optional).
Using cables other than the above may cause a malfunction.
Use cursor button on the camera to select [PictBridge(PTP)],
and press [MENU/SET]
Use cursor button to select a picture to print and press
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→258))
■
To cancel print
Press [MENU/SET].
Check the plug direction and insert it straight in.
(If the cable is inserted in the wrong direction, the
plug could become deformed and cause faulty
operation)
Also, do not insert into the wrong socket. Doing so
may cause damage to this unit.
• Do not disconnect the USB
connection cable (supplied) when
the cable disconnection icon
is
displayed (may not be displayed with
some printers).
USB connection cable
(supplied)
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
