Wi-Fi/NFC
About connections
VQT5A33
- 230 -
Connecting at home (through a network)
Select a connection method to the wireless access point.
*
WPS refers to a function that allows you to easily configure the
settings related to the connection and security of wireless LAN
devices. To check if the wireless access point you are using is
compatible with WPS, refer to the manual of the wireless access
point.
Connection method Description
[WPS (Push-Button)]
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
Press the wireless access point WPS button until it
switches to WPS Mode
• Refer to the wireless access point instruction manual for details.
[WPS (PIN code)]
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
Select the wireless access point you are connecting to
Enter the PIN code displayed on the camera screen into the
wireless access point
Press [MENU/SET]
• Refer to the wireless access point instruction manual for details.
[Manual Connection]
Select this option when you are not sure about the WPS compatibility,
or when you want to search for and connect to a wireless access
point.
• For details (→231).
To Next Page
Loading...
