Application (Record)
Using Zoom
VQT5A33
- 74 -
[Step Zoom]
You can set the zoom operation to allow easy visualization of the angle of view (picture
angle) for the focal length of a regular fixed focal length lens (as with a 35 mm film
camera). When using the Step Zoom, you can operate the zoom ratio as easily as
changing the camera lens.
• If recording in [Intelligent Auto] Mode or Scene Mode, you can adjust the [Step Zoom]
with the control ring.
If the setting assigned to the control ring is [Step Zoom], [Step Zoom] will also be
available for use in other modes. (→118)
Turn the control ring
●
When the control ring is operated, the focal length is displayed on a standard picture
aspect ratio of 4:3 as a reference.
●
The focal length will change in the following cases:
• When [iHandheld Nite Shot] is set to [ON]
• When [Burst] is set to [ ]
• When [Handheld Night Shot] is set in Scene mode
●
[Step Zoom] cannot be used in the following cases:
• When recording motion pictures
• Scene Mode ([3D Photo Mode])
To Next Page
Loading...
