Basics
Using the control ring
VQT5A33- 27 -
The “Control Ring” is an easy and convenient way to adjust several settings, depending
on the camera mode selected. You can use the control ring to change the settings of the
unit.
(In [Intelligent Auto] Mode)
Items that can be set by the control ring vary depending on recording modes.
Following are the pre-assigned settings.
Recording mode Setting
[Intelligent Auto] Mode Step Zoom (→74)
[Program AE] Mode ISO Sensitivity (→130)
[Aperture-Priority] Mode Aperture adjustment (→92)
[Shutter-Priority] Mode Shutter speed adjustment (→93)
[Manual Exposure] Mode Aperture adjustment (→94)
[Panorama Shot] Mode Picture effects change (→105)
[Scene Mode] Step Zoom (→74)
[Creative Control] Mode Picture effects change (→96)
• The control ring can be used to change to your preferred settings. (→118)
• You can also perform operations with the control dial. (Some operations may differ
under certain recording conditions such as [Manual Exposure] mode.)
●
When Manual Focus is set, it is assigned to focus adjustment. (→87)
To Next Page
Loading...
