Wi-Fi/NFC
Transferring pictures automatically [Smart Transfer]
VQT5A33
- 225 -
[Smart Transfer]
Preparation: Set [Smart Transfer]. (→224)
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the
USB connection cable (supplied), and plug the AC adaptor
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection
cable (supplied)
• [Smart Transfer] starts automatically according to the [Charge Priority] (→228)
setting.
• [Smart Transfer] is not available when the memory card is locked.
• Depending on the specifications of the PC, [Smart Transfer] may fail.
●
Except at the ambient temperature between 0 °C and 40 °C (32 °F to 104 °F), [Smart
Transfer] may not work.
●
When [Destination] is set to [PC], the pictures are stored in the incoming folder
created. (→200)
●
If there are pictures that are not transferred when [Auto Transfer] is set to [OFF],
the message that confirms whether to transfer these pictures is displayed. Select a
desired option.
To Next Page
Loading...
