Application (Record)
Useful features for travel
VQT5A33- 126 -
[Travel Date]
If you set your travel schedule and record pictures, the day of your trip on which the
picture was taken will be recorded.
Select [Travel Date] from the [Setup] menu (→52)
Use cursor button to select [Travel Setup] and press
[MENU/SET]
Use cursor button to select [SET] and press [MENU/SET]
Use cursor button to select the departure date and press
[MENU/SET]
Use cursor button to select the return date and press
[MENU/SET]
■
To record [Location]
Once the [Travel Setup] is set, you can set the location.
Select [Location] in step above
Use cursor button to select [SET] and press [MENU/SET]
Enter your location (Entering text (→65))
●
The travel date is calculated from the set departure date and the date set in the
camera’s clock. When destination is set in [World Time], days elapsed are calculated
based on local destination time.
●
When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is
not displayed even if [Travel Setup] is set to [SET] after recording.
●
If settings are made before departure date, number of days to departure are not
recorded.
●
To print [Location] or the number of days that have passed, either use [Text Stamp] or
print using the “PHOTOfunSTUDIO” software on the supplied CD-ROM.
●
[Travel Date] cannot be recorded for AVCHD motion pictures.
●
[Location] cannot be recorded for MP4 motion pictures.
●
Cannot be set when using [Intelligent Auto] Mode. The settings in other Recording
Mode are applied.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
