Preparations
Inserting and removing the card (optional)
VQT5A33- 19 -
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
To remove the card, turn the camera off and wait until the LUMIX indicator on the
LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
• Make sure that the camera is turned off.
Slide the release lever to the
[OPEN] position and open the card/
battery door
[OPEN] [LOCK]
Release lever
Insert the card all the way
• Push in until it clicks.
Card (Check orientation)
Do not touch the terminals on
the back of the card.
Close the card/battery door
• Slide the release lever to the [LOCK] position.
■
To remove card
Press the center of the
card
Press
Pull out
To Next Page
Loading...
