Wi-Fi/NFC
Operating the camera using a smartphone
VQT5A33- 174 -
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
The “Image App” is an application provided by Panasonic that allows your smartphone to
perform the following operations of a Wi-Fi-compatible LUMIX.
For Android™ apps For iOS apps
Supported
OS
Android 2.2 - Android 4.2
*
iOS 4.3 - iOS 6.1
Installation
procedure
Connect your Android device to a
network
Select “Google Play
TM
Store”
Enter “Panasonic Image App” into the
search box
Select “Panasonic Image App” and
install it
• The icon will be added to the
menu.
Connect the iOS device to the
network
Select “App Store
SM
”
Enter “Panasonic Image App” into the
search box
Select “Panasonic Image App” and
install it
• The icon will be added to the
menu.
• Use the latest version.
• The service may not be able to be used properly depending on the type of smartphone
being used. For information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)
• When downloading the app on a mobile network, high packet communication fees may
be incurred depending on the details of your contract.
*
To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the device must be
compatible with Wi-Fi Direct™.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
